Your shopping cart is empty!
Mona-Guard Nhance enhances the colouration of the substrate and is a unique, impregnation utlising hydrophobic and Oleophobic chemistry to provide water repellence, Oil repellence and resistance to forms of staining agents on porous building materials.
For use on exterior roofs, facades, floors landscaping products and internally on floors:
Monaseal provides a technical advisory service for on-site assistance and advice on product selection, evaluation trials and application equipment.
| Colour Range | Invisible |
| Preparation | Ensure surface to be treated is clean, not contaminated and dry. |
| Application | Low pressure spray, brush or roller. |
| Coverage | 3-15 m2/Ltr depending on substrate type |
| Curing Time | Touch dry 2-3 Hrs Fully cure 24 Hrs |
| Equipment Care | Clean with water immediately after use. |
| Pack Size | 5 or 25 Ltrs drums, and 1000 Ltrs IBC |
| Storage | Store in dry condictions at temperatures between + 5 & + 35 degree C |
| Shelf Life | 12 months in original sealed container |
| HSE | See MSDS |
The surface must be sound, clean, dry, free from frost, laitance, oil, grease and all dust, loose and friable materials must be complately removed from surfaces before application of Mona-Guard Extra.
For use on application for all recommended substrate prepartation materials, please consult the TDS for each material.
| Block Paving | 5m2/litre |
| Facing brickwork | 5m2/litre |
| Concrete | 5m2/litre |
| Concrete blockwork | 3m2/litre |
| Reconstructed stone | 3m2/litre |
| Granite | 15m2/litre |
| Marble | 13m2/litre |
| Sandstone | 8m2/litre |
| Pre-cast Concrete | 8m2/litre |
| Terrazzo | 8m2/litre |
*Please note - Monaseal recommend a small trial area to ensure correct application levels are used to obtain the required performance properties subjected to the differing porosity levels of porous building materials.