Your shopping cart is empty!
Mona-Guard Revive is a superior product based upon a combination of acrylic, hydrophobic and oleophobic chemistry that provides a restorative, decorative and flexible protection to existing tarmac and concrete surfaces . Mona-Guard Revive ensures avoidance of expensive resurfacing is required and enhances / revives the visual astectis of the surfaces whilst providing a surface that is impermeable to water, grease and stains. Mona-Guard Revive will reduce the maintainance required within its life cycle, maintaining a cleaner and longer lasting appearance.
For use externaly upon domestic, commercial or industrial:
Monaseal provides a technical advisory service for on-site assistance and advice on product selection, evaluation trials and application equipment.
| Colour Range | See colour chart |
| Preparation | Ensure surface to be treated is clean, not contaminated and dry. |
| Application | Brush or medium or long haired roller - Avoid pooling of Mona-Guard Revive |
| Coverage | 2-4 m2/Ltr depending on substrate type |
| Curing Time | Touch dry 4 Hrs Fully cure 28 days |
| Equipment Care | Clean with water immediately after use. |
| Pack Size | 5 or 25 Ltrs drums, and 1000 Ltrs IBC |
| Storage | Store in dry condictions at temperatures between + 5 & + 35 degree C |
| Shelf Life | 12 months in original sealed container |
| HSE | See MSDS |
The surface must be sound, clean, dry, free from frost, laitance, oil, grease and all dust, loose and friable materials must be complately removed from surfaces before application of Mona-Guard Extra.
For use on application for all recommended substrate prepartation materials, please consult the TDS for each material.
| Tarmac | 4m2/litre |
| Concrete | 3m2/litre |
*Please note - Monaseal recommend a small trial area to ensure correct application levels are used to obtain the required performance properties subjected to the differing porosity levels of porous building materials.